Configuring syslog on Zyxel IES-1000
ZyXEL products are able to send system log to a Syslog deamon such as Unix Syslogd and
WinSyslog.
When DSL or Ethernet ports are linked up/down, IES-1000 sends a record to Syslog server.
IES-1000 Setup
The IES-1000 can be configured using the web interface, or the command line.
1. Web Configurator
The IES-1000 provides a Web configurator for easy management. Please use a Web Browser with your AAM1008 or SAM1008's
IP to access the Web configurator. The default ID and Password is 'Admin' and '1234'.
- Enter 'Maintenance' webpage.
- Enable or disable sending any logs to UNIX Syslog Server.
- Assign the Syslog Server IP
- Choose a log facility from 'Local 1' to 'Local 7'
Screenshot:
2. Command line
Syntax:
syslog - Display current settings.syslog <mode> - Enable/Disable syslog.syslog facility <facility> - Set syslog facility.syslog server <server IP> - Set UNIX syslog server.
Where
- <mode> = "enable" or "disable"
- <facility> = "local1" to "local7"
- <server IP> = IP address of syslog server
Example:
192.168.1.1 sys> syslog enable
192.168.1.1 sys> syslog facility local2
192.168.1.1 sys> syslog server 172.21.1.109
Still problems enabling syslog? Find the solution in our
forum or post a question there!
Syslog messages generated by these products can be received
by MonitorWare Agent and
WinSyslog.
All information in this section is to the best of our knowledge but without warrenty of
any kind. This is free information - use it at your sole risk.
[Back to Syslog Enabled
Products]
|
